• 12V DC reliable recovery winch rated at 8,000 – 10,000 -12,000 lbs pulling exceeds your expectations
• Series-wound motor for power and fast line
• Compact control pack fixed above motor for quick It is also removable for various mounting options.
• Exclusive brake design with 37C device for better winching control.
• Durable, smooth, and reliable 3-stage planetary gear
• Fine powder coated finish provides better weather
• Waterproof rated IP
• 8 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 45°

Rated Line Pull: 12,000 lb (5,443 kg} single line

Motor: 4,847 w/6.5 hp 12V series wound

Gear Ratio: 3-stage planetary 234.6:1

Clutch (freespooling): Rotating ring gear

Brake (Inside the drum): Exclusive brake design with No. 37C device

Winch construction: Aluminum die cast housings with steel drum

Drum size: 63.5 x 222.5L ( 2.5″ x 8.8″L }

Control: Waterproof remote w/5 m cord

Rope size: Galvanized aircraft A7 x 19 wire rope, 10 .3 mm x 25.5 m

(13/32″ x 83.7′}

Synthetic rope, 11 mm x 25.5 m (7/16″ x 83.7′}

Mounting bolt pattern: 254 x 114 mm ( 10″ x 4.5″ }

Winch weight: GIO 120: 37.7 kg/83.1 lb ; GIO 120s: 35.2 kg/77.6 lb

Gross weight: GIO 120: 52.7kg/116 lb ; GIO 120s: 47.2 kg/104.1 lb

Box dimension: 650 x 195 x 415 mm ( 25.6 ” x 7.7 ” x 16.3″}

The post GIO 120 first appeared on comeupsa.co.za.

 Line Speed and Amp. Draw (1^st layer of wire rope on the drum): 

Line Lift and Rope Capacity:

Warning
* Hoists are not to be used for the lifting or moving of persons

Warranty
Each new hoist is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.

Accessory:

The post GTD-2200 first appeared on comeupsa.co.za.

• Part number: PN 780254 (12V) / PN 780988 (24V)
• Rated line pull: 3,856 kg / 8,500 lb
• Motor: 3,430 w / 4.6 hp 12V series wound
  1,940 w / 2.6 hp 24V series wound
• Gear train: 2-stage spur gear PLUS worm gear 228.9:1
• Clutch (freespooling): Mechanism lever
• Brake: Irreversible worm gear brake PLUS mechanism ratchets wheel brake
• Drum size: 82 x 229 mm (3.2” x 9″)
• Control: Waterproof remote w/5 m (17′) cord
• Rope type: Galvanized aircraft A7 x 19
• Rope size: 8.0 mm x 45 m (5/16″ x 150′)
• Mounting bolts pattern: 273 x 110 mm (10.7” x 4.3”)
  257 x 172 mm (10.1″ x 6.8″)
• Winch weight: 40 kg / 88.2 lb
• Gross weight : 51 kg / 112.5 lb
• Box dimension, (L x D x H) : 610 x 427 x 350 mm (24″ x 16.8″ x 13.8″)

Line Speed and Amp. Draw (1^st layer of wire rope on the drum): 

Line Pull and Rope Capacity:

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Accessory:

The post Wolf 8.5 first appeared on comeupsa.co.za.

• Part number: PN 782478 (12V) / PN 783415 (24V)
• Rated line pull: 5,443 kg / 12,000 lb
• Motor: 3,430 w / 4.6 hp 12V series wound
  2,240 w / 3.0 hp 24V series wound
• Gear train: 2-stage spur gear PLUS worm gear 424:1
• Clutch (freespooling): Mechanism lever
• Brake: Irreversible worm gear brake PLUS mechanism ratchets wheel brake
• Drum size: 89 x 229 mm (3.5” x 9″)
• Control: Waterproof remote w/5 m (17′) cord
• Rope type: Galvanized aircraft A7 x 19
• Rope size: 9.5 mm x 30.5 m (3/8″ x 100′)
• Mounting bolts pattern: 273 x 110 mm (10.7” x 4.3”)
  257 x 172 mm (10.1″ x 6.8″)
• Winch weight: 41 kg / 90.4 lb
• Gross weight : 51 kg / 112.5 lb
• Box dimension, (L x D x H) : 610 x 427 x 350 mm (24″ x 16.8″ x 13.8″)

Line Speed and Amp. Draw (1^st layer of wire rope on the drum): 

Line Pull and Rope Capacity:

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Accessory:

The post Wolf 12.0 first appeared on comeupsa.co.za.

• Part number: PN 850812 (12V) / PN 850824 (24V)
• Rated line pull: 3,630 kg / 8,000 lb (SAE J706 rating)
  3,560 kg (EN 14492-1 rating)
• Motor: 3,430 w / 4.6 hp 12V series wound
  1,940 w / 2.6 hp 24V series wound
• Gear train: 3-stage planetary 211:1
• Clutch (freespooling): Rotating ring gear
• Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
• Winch construction: Aluminum die cast housings with steel drum
• Drum size: 90 x 205 mm (3.5” x 8.1″)
• Rotation of winch: Wire rope shall be under-wound orientation only
• Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
• Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  254 x 165 mm (10″ x 6.5″)
• Wire rope recommended: 
  * 10 mm x 22.6 m, 1,960 N/mm² grade with a minimum breaking strength of 69.8 kN required for EN 14492-1 rating.
  * 3/8″ x 100′, EIPS grade with a minimum breaking strength of 15,663 lbf required for SAE J706 rating
• Winch weight (including rope) : 31 kg / 68.3 lb
• Gross weight : 47 kg / 104 lb
• Box dimension, (L x D x H) : 650 x 260 x 440 mm (25.6″ x 10.2″ x 17.3″)

  Compliant with EN 14492-1 requirements for vehicle recovery winch:
  * The working coefficient for the first rope layer on the drum shall be at least 2.
  * The D/d ratio to the center of the rope shall be at least 10 for the drum.
  * Drum freeboard shall be at least 1.5 x rope diameter

Line Speed and Amp. Draw (1^st layer of wire rope on the drum): 

Line Pull and Rope Capacity:

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.

• 10 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 36° increments.

Accessory:

The post Rhino 8 first appeared on comeupsa.co.za.

• Part number: PN 851212 (12V) / PN 851224 (24V)
• Rated line pull: 5,440 kg / 12,000 lb (SAE J706 rating)
  5,100 kg (EN 14492-1 rating)
• Motor: 4,180 w / 5.6 hp 12V series wound
  2,690 w / 3.6 hp 24V series wound
• Gear train: 3-stage planetary 315:1
• Clutch (freespooling): Rotating ring gear
• Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
• Winch construction: Aluminum die cast housings with steel drum
• Drum size: 114 x 195.5 mm (4.5” x 7.7″)
• Rotation of winch: Wire rope shall be under-wound orientation only
• Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
• Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  254 x 165 mm (10″ x 6.5″)
• Wire rope recommended: 
  * 12 mm x 21.4 m, 1,960 N/mm² grade with a minimum breaking strength of 100.5 kN required for EN 14492-1 rating.
  * 1/2″ x 100′, EIPS grade with a minimum breaking strength of 22,552 lbf required for SAE J706 rating
• Winch weight (including rope) : 47 kg / 104 lb
• Gross weight : 61 kg / 134 lb
• Box dimension, (L x D x H) : 695 x 313 x 473 mm ( 27.3″ x 12.3″ x 18.6″)

  Compliant with EN 14492-1 requirements for vehicle recovery winch:
  * The working coefficient for the first rope layer on the drum shall be at least 2.
  * The D/d ratio to the center of the rope shall be at least 10 for the drum.
  * Drum freeboard shall be at least 1.5 x rope diameter

Line Speed and Amp. Draw (1^st layer of wire rope on the drum): 

Line Pull and Rope Capacity:

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

• 10 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 36° increments.

Accessory:

The post Rhino 12 first appeared on comeupsa.co.za.

• Part number: PN 681260 (Std. drum)  / PN 681266 (Long drum)
• Rated line pull: 3,175 kg / 7,000 lb (SAE J706 rating)
  3,200 kg (EN 14492-1 rating)
• Line speed (at 1^st layer of rope) : 5.2 mpm at 40 l/min (17.1 fpm at 10.6 g/min)
• Operation pressure: 110 bar / 1,595 psi
• Max oil flow: 40 l/min (10.6 g/min)
• Hydraulic motor: 48.6 cm³/rev (3.0 in³/rev)
• Gear ratio: 1-stage planetary gear 50:1
• Winch construction: Aluminum die cast housings with steel drum
• Clutch (Freespooling): Worm gear disengaged
• Brake: Irreversible worm gear
• Rotation of winch: Wire rope shall be under-wound orientation only
• Drum barrel diameter: 90 mm (3.5″)
• Drum flange diameter: 168 mm (6.6”)
• Distance between flanges: 160 mm (6.3″) – Std. drum
  240 mm (9.5″) – Long drum
• Mounting bolts pattern: 130 x 211 mm (5.1″ x 8.3”) – Std. drum
  130 x 291 mm (5.1” x 11.5”)  – Long drum
• Wire rope recommended:
  *10 mm x 10.7 m for Std. drum and 16.2 m for Long drum, 1,960 N/mm² grade with a minimum breaking strength of 69.8 kN required for EN 14492-1 rating.
  *3/8″ x 57.4′ for Std. drum and 87.3′ for Long drum, EIPS grade with a minimum breaking strength of 15,663 lbf required for SAE J706 rating
• Winch weight: 29 kg / 63.9 lb – Std. drum
  33 kg / 72.8 lb – Long drum
• Gross weight : 33 kg / 72.8 lb  – Std. drum
  37 kg / 81.6 lb – Long drum
• Box dimension, (L x D x H) : 431 x 386 x 256 mm (17″ x 15.2″ x 10.1″)  – Std.drum
  511 x 386 x 256 mm (20.1″ x 15.2″ x 10.1″) -Long drum

  Compliant with EN 14492-1 requirements for vehicle recovery winch:
  * The working coefficient for the first rope layer on the drum shall be at least 2.
  * The D/d ratio to the center of the rope shall be at least 10 for the drum.

Performance Data: 

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Hydraulic System Installation:

Accessory:

The post Yak 7 first appeared on comeupsa.co.za.

• Part number: PN 680816 (Std. drum)  / PN 681091 (Long drum)
  PN 681123 (Std. drum – Clutch in left side)  /  PN 681347 (Long drum – Clutch in left side)
• Rated line pull: 3,630 kg / 8,000 lb (SAE J706 rating)
  3,560 kg (EN 14492-1 rating)
• Line speed (at 1^st layer of rope) : 15 mpm at 60 l/min (49 fpm at 15.9 g/min)
• Operation pressure: 150 bar / 2,175 psi
• Max oil flow: 60 l/min (15.9 g/min)
• Hydraulic motor: 77.8 cm³/rev (4.7 in³/rev)
• Gear ratio: 2-stage planetary gear 16:1
• Winch construction: Aluminum die cast housings with steel drum
• Clutch (Freespooling): Rotating ring gear
• Brake: Spring applied drag brake together with over-center valve supplied
• Rotation of winch: Wire rope shall be under-wound orientation only
• Drum barrel diameter: 90 mm (3.5″)
• Drum flange diameter: 201.5 mm (7.9”)
• Distance between flanges: 190 mm (7.5″) – Std. drum
  253 mm (10″) – Long drum
• Mounting bolts pattern: 228.6 x 171.2 mm (9” x 6.7”) ; 311.2 x 114.3 mm (12.3″ x 4.5″) – Std. drum
  291.6 x 171.2 mm (11.5” x 6.7”) ; 374.2 x 114.3 mm (14.7″ x 4.5″) – Long drum
• Wire rope recommended:
  10 mm x 30.5 m (3/8″ x 100′) for Std. drum and 40 m (131′) for Long drum, 1,960 N/mm² (EIPS) grade with a minimum breaking strength of 69.8 kN (15,663 lbf) required.for SAE J706 and EN 14492-1 ratings
• Winch weight: 35.5 kg / 78.1 lb – Std. drum
  37.5 kg / 82.7 lb – Long drum
• Gross weight: 43.3 kg / 95.3 lb  – Std. drum
  45.3 kg / 99.9 lb – Long drum
• Box dimension, (L x D x H) : 615 x 380 x 300 mm (24.2″ x 15″ x 11.8″)  – Std.drum
  665 x 370 x 285 mm (26.2″ x 14.6″ x 11.2″) -Long drumCompliant with EN 14492-1 requirements for vehicle recovery winch:
  * The working coefficient for the first rope layer on the drum shall be at least 2.
  * The D/d ratio to the center of the rope shall be at least 10 for the drum.
  * Drum freeboard shall be at least 1.5 x rope diameter

Performance Data: 

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Hydraulic System Installation:

Accessory:

The post HV-8 first appeared on comeupsa.co.za.

• Part number: PN 682546 (Std. drum)  / PN 683129 (Std. drum – Clutch in left side)
• Rated line pull: 4,535 kg / 10,000 lb (SAE J706 rating)
  4,300 kg (EN 14492-1 rating)
• Line speed (at 1^st layer of rope) : 14 mpm at 60 l/min (46 fpm at 15.9 g/min)
• Operation pressure: 150 bar / 2,175 psi
• Max oil flow: 60 l/min (15.9 g/min)
• Hydraulic motor: 97.3 cm³/rev (5.9 in³/rev)
• Gear ratio: 2-stage planetary gear 16:1
• Winch construction: Aluminum die cast housings with steel drum
• Clutch (Freespooling): Rotating ring gear
• Brake: Spring applied drag brake together with over-center valve supplied
• Rotation of winch: Wire rope shall be under-wound orientation only
• Drum barrel diameter: 102 mm (4″)
• Drum flange diameter: 201.5 mm (7.9”)
• Distance between flanges: 253 mm (10″)
• Mounting bolts pattern: 291.6 x 171.2 mm (11.5” x 6.7”)
  374.2 x 114 mm (14.7” x 4.5”)
• Wire rope recommended:
  11 mm x 27 m (7/16″ x 89′), 1,960 N/mm² (EIPS) grade with a minimum breaking strength of 84.4 kN (18,939 lbf) required for SAE J706 and EN 14492-1 ratings.
• Winch weight: 37 kg / 81.4 lb
• Gross weight: 46.6 kg / 102.5 lb
• Box dimension, (L x D x H) : 680 x 380 x 300 mm (26.8″ x 15″ x 11.8″)Compliant with EN 14492-1 requirements for vehicle recovery winch:
  * The working coefficient for the first rope layer on the drum shall be at least 2.
  * The D/d ratio to the center of the rope shall be at least 10 for the drum.
  * Drum freeboard shall be at least 1.5 x rope diameter

Performance Data: 

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Hydraulic System Installation:

Accessory:

The post HV-10 first appeared on comeupsa.co.za.

• Part number: PN 684311 (Std. drum)  / PN 685433 (Std. drum – Clutch in left side)
• Rated line pull: 5,440 kg / 12,000 lb (SAE J706 rating)
  5.100 kg (EN 14492-1 rating)
• Line speed (at 1^st layer of rope) : 10 mpm at 60 l/min (33 fpm at 15.9 g/min)
• Operation pressure: 150 bar / 2,175 psi
• Max oil flow: 60 l/min (15.9 g/min)
• Hydraulic motor: 125 cm³/rev (7.6 in³/rev)
• Gear ratio: 2-stage planetary gear 19.4:1
• Winch construction: Aluminum die cast housings with steel drum
• Clutch (Freespooling): Rotating ring gear
• Brake: Spring applied drag brake together with over-center valve supplied
• Rotation of winch: Wire rope shall be under-wound orientation only
• Drum barrel diameter: 114.3 mm (4.5″)
• Drum flange diameter: 252 mm (9.9”)
• Distance between flanges: 255 mm (10″)
• Mounting bolts pattern: 303.5 x 114.3 mm (12” x 4.5”)
  368.5 x 171.2 mm (14.5” x 6.7”)
• Wire rope recommended: 12 mm x 39 m (1/2″ x 128′), 1,960 N/mm² (EIPS) grade with a minimum breaking strength of 100.5 kN (22,552 lbf) required for SAE J706 and EN 14492-1 ratings
• Winch weight: 71 kg / 156.5 lb
• Gross weight: 87 kg / 191.8 lb
• Box dimension, (L x D x H) : 735 x 430 x 335 mm (29″ x 16.9″ x 13.2″)

  Compliant with EN 14492-1 requirements for vehicle recovery winch:
  * The working coefficient for the first rope layer on the drum shall be at least 2.
  * The D/d ratio to the center of the rope shall be at least 10 for the drum.
  * Drum freeboard shall be at least 1.5 x rope diameter

Performance Data: 

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Hydraulic System Installation:

Accessory:

The post HV-12 first appeared on comeupsa.co.za.