HV-8

  • Powered by a PTO/power take off unit driven pump
  • Fast and variable recovery speeds for high work rate
  • Highly efficient and constant operating torque motor
  • 2 stage planetary gear train for greater pulling force
  • Turn clutch by ergonomic T-handle for rapid wire rope payout
  • Drag brake and over center valve providing complete braking
  • EN 14492-1 supported: 10:1 D/d ratio and 2:1 wire rope strength allow severe duty vehicles and commercial recovery
  • Meet SAE J706, CE Machinery Directive 2006/42/EC and support EN 14492-1: 2006 Power Driven Winches.
Category:

Description

Specification/Part Numbers
  • Part number: PN 680816 (Std. drum)  / PN 681091 (Long drum)
    PN 681123 (Std. drum – Clutch in left side)  /  PN 681347 (Long drum – Clutch in left side)
  • Rated line pull: 3,630 kg / 8,000 lb (SAE J706 rating)
    3,560 kg (EN 14492-1 rating)
  • Line speed (at 1st layer of rope) : 15 mpm at 60 l/min (49 fpm at 15.9 g/min)
  • Operation pressure: 150 bar / 2,175 psi
  • Max oil flow: 60 l/min (15.9 g/min)
  • Hydraulic motor: 77.8 cm3/rev (4.7 in3/rev)
  • Gear ratio: 2-stage planetary gear 16:1
  • Winch construction: Aluminum die cast housings with steel drum
  • Clutch (Freespooling): Rotating ring gear
  • Brake: Spring applied drag brake together with over-center valve supplied
  • Rotation of winch: Wire rope shall be under-wound orientation only
  • Drum barrel diameter: 90 mm (3.5″)
  • Drum flange diameter: 201.5 mm (7.9”)
  • Distance between flanges: 190 mm (7.5″) – Std. drum
    253 mm (10″) – Long drum
  • Mounting bolts pattern: 228.6 x 171.2 mm (9” x 6.7”) ; 311.2 x 114.3 mm (12.3″ x 4.5″) – Std. drum
    291.6 x 171.2 mm (11.5” x 6.7”) ; 374.2 x 114.3 mm (14.7″ x 4.5″) – Long drum
  • Wire rope recommended:
    10 mm x 30.5 m (3/8″ x 100′) for Std. drum and 40 m (131′) for Long drum, 1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 69.8 kN (15,663 lbf) required.for SAE J706 and EN 14492-1 ratings
  • Winch weight: 35.5 kg / 78.1 lb – Std. drum
    37.5 kg / 82.7 lb – Long drum
  • Gross weight: 43.3 kg / 95.3 lb  – Std. drum
    45.3 kg / 99.9 lb – Long drum
  • Box dimension, (L x D x H) : 615 x 380 x 300 mm (24.2″ x 15″ x 11.8″)  – Std.drum
    665 x 370 x 285 mm (26.2″ x 14.6″ x 11.2″) -Long drumCompliant with EN 14492-1 requirements for vehicle recovery winch:
    * The working coefficient for the first rope layer on the drum shall be at least 2.
    * The D/d ratio to the center of the rope shall be at least 10 for the drum.
    * Drum freeboard shall be at least 1.5 x rope diameter

Performance Data: 

Line Pull and Rope Capacity Line Speed
Layer of Wire Rope
Pull by layer,
kg / lb
Total Rope on the Drum, m / ft
 at 60 l/min (15.9 g/min),
mpm / fpm
Std. drum
 Long drum
1st
3,630 / 8,000
5.8 / 19.0
  7.8 / 25.6  15.0 / 49.0
2nd
3,025 / 6,669
12.8 / 42.0
  17.1 / 56.1 18.2 / 59.7
3rd
2,593 / 5,717
20.9 / 68.6
  28.0 / 91.9 21.2 / 69.6
4th
2,269 / 5,002
30.5 / 100
  40 / 131 24.2 / 79.4

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
Dimension, mm/in:

 

Hydraulic System Installation:

Accessory:

Standard Accessories Option Accessories
  • 179 mm throat roller fairlead for Std. drum
  • 245 mm throat roller fairlead for Long drum
  • Over center valve
  • Cable tensioner : PN 881238 for HV-8 Std. drum
  • Cable tensioner: PN 880179 for HV-8 Long drum
  • Air Clutch

Related products